ZyXEL Communications n/a User Manual

DSL & IAD CLI Reference Guide

Use these commands to configure QoS settings on the ZyXEL Device.

The following table describes the values required for many commands. Other values are 
discussed with the corresponding commands.

The following section lists the commands for this feature.     

Table 40   QoS Command Input Values

The QoS interface name includes lan, wan, dmz, and wlan. The interfaces to 
which you can apply QoS vary by ZyXEL Device model. 

This is a class name. Enter a descriptive name of up to 20 alphanumeric 
characters, including spaces.

This is a class number (from 0 to 99). 

Table 41   QoS Commands

qos active [on|off]

Enables or disables QoS.

qos class <interface> <add|mod> 

<class-number> [name <class-

name>] [priority <0~7> | priority 

auto]

Adds or modifies a class for the specified interface.

add|mod

: Add or modify the class. 

priority

: Sets the class priority ranging from 0 (the lowest) to 7 

(the highest).

priority auto

: Sets the ZyXEL Device to map the matched traffic 

to a queue according to the internal QoS mapping table.

qos class <interface> del <class-

number> 

Removes the specified class from the specified interface.

qos config <save|load|clear>

Loads, saves or clears QoS configuration from/to the permanent 
memory.