ZyXEL Communications n/a User Manual

Chapter 17 Quality of Service (QoS)

DSL & IAD CLI Reference Guide

qos filter <interface> add 

<class-number> [service <service-

type>] [dip [not] <dst-ip> <dst-

ip-mask>] [dport [not] <dst-port-

start> <dst-port-end>] [sip [not] 

<src-ip> <src-ip-mask>] [sport 

[not] <src-port-start> <src-port-

end>] [proto [not] <protocol>] 

[dscp [not] <dscp>] [size [not] 

<min-ip-length> <max-ip-length>] 

[dmac [not] <dst-mac> <dst-mac-

mask>] [smac [not] <src-mac> 

<src-mac-mask>] [vid [not] <vlan-

id>] [vpri [not] <priority>] 

[portid [not] <lan-port-id>] 

[pvcid [not] <pvc-id>]

Adds a new QoS filter for the specified interface.

: Sets the type of application (sip or ftp).

: Enters the destination IP address.

: Enters the destination subnet mask.

: Enters the first of the contiguous port number of 

the destination.

: Enters the last of the contiguous port number of 

the destination.

: Enters the source IP address.

: Enters the source subnet mask.

: Enters the first of the contiguous port number of 

the source.

: Enters the last of the contiguous port number of 

the source.

: Enters the number of the protocol type (the protocol field 

in the IP header). For example 1 for ICMP, 6 for TCP, and 17 for 
UDP.

: Specifies a DSCP number between 0 and 63.

: Enters the minimum packet length (from 28 to 

1500).

: Enters the maximum packet length (from 28 to 

1500).

: Enters destination MAC address.

: Types the mask for the MAC address.

: Enters the source MAC address.

: Types the mask for the MAC address.

: Specifies a VLAN ID number between 2 and 4094.

: Sets the class priority ranging from 0 (the lowest) to 7 

(the highest).

: Enters a LAN port number.

: Enters a remote node number.

qos filter <interface> del 

<class-number>

Deletes a filter for class # in the specified interface.

qos filter <interface> 

<enable|disable> <class-number>

Disables or enables a filter for class # in the specified interface. 

qos filter <interface> order 

<class-number> <new-order>

Changes the QoS filter ordering.
The ordering of your rules is important as rules are applied in turn.

qos filter <interface> index 

<class-number> <save-index>

Changes the index number of a QoS filter in TR-069.

: Enters the new index number from 1 to 30. 

qos filter show

Displays all filters settings.

qos policer <index> 

<enable|disable>

Disables or enables the specified policer.

: Enters the index number (from 1 to 10) of the policer.

qos policer <index> set 

<bandwidth (kbps)> [<size 

(bytes)> <meter-type> 

<conforming-act> <non-conforming-

act>]

Sets the bandwidth policer settings.

qos policer <index> show

Displays the specified policer settings.

qos policer show

Displays all policers settings.

Table 41   QoS Commands (continued)