ZyXEL Communications n/a User Manual

Chapter 20 VoIP Commands

DSL & IAD CLI Reference Guide

voice config common ivrlanguage <index> 

<0~2> 

Specifies the language for IVR. The languages 
supported on your ZyXEL Device differ by model. This 
command allows you to specify one of the languages 
supported.

voice config common pstnfallback <index> 

<0:Disable PSTN Fallback|1:Enable PSTN 

Fallback> 

Enables or disables the PSTN fallback function. When 
this function is enabled the ZyXEL Device uses the 
PSTN line to complete calls if a SIP account is 
unregistered.

voice config common sipfallback <index> 

<0:Disable SIP Fallback|1:Enable SIP 

Fallback> 

Enables or disables the SIP fallback function. When this 
function is enabled the ZyXEL Device uses a SIP line to 
complete calls if the PSTN line is not receiving a signal.

voice config common dialmethod <index> 

<0:European|1:USA>

Sets whether the ZyXEL Device uses the European 
dialing method or dialing method based on the American 
system.

voice config common forcedialtone 

<index><0:Busytone when SIP/PSTN Not 

Registered|1:Dialtone when SIP/PSTN Not 

Registered> 

Sets the ZyXEL Device to provide a dial tone even if 
there are no SIP lines registered on the ZyXEL Device.

voice config common removepound <index> 

<0:not removed|1:removed pound> 

Enables removing the pound (#) key as part of the dialed 
digits. If this function is not activated then the pound key 
is sent along with the dialed digits when making a call.

voice config common countrycode <index> 

<countrycode|h:for help> 

Sets the country code for the ZyXEL Device. Enter h as 
the country parameter to view the countries supported by 
your ZyXEL Device.

voice config common webdisable 

<index><0:1>

Enables or disables configuring the call forwarding 
feature in the web configurator.

voice config common save <index> 

Saves the common settings entry in the working buffer to 
non-volatile memory. 
The working buffer is a volatile memory space. The 
settings in the working buffer are not applied to the 
ZyXEL Device until you execute this command.

voice config common display <index> 

Displays the saved values for the common settings entry. 

Table 53   Common Settings Command Summary