ZyXEL Communications n/a User Manual

 Chapter 20 VoIP Commands

DSL & IAD CLI Reference Guide

This example shows the country codes supported by the ZyXEL Device and selects Poland as 
the location of the ZyXEL Device.   

Use these commans to configure auto-provisioning on the ZyXEL Device.  

ras> voice config common index 1

ras> voice config common countrycode 1 h

Please input 0 or 42 to select country!254:Default. 255: MRD

0:USA | 1:JAPAN | 2:TAIWAN | 3: AUSTRIA | 4:BELGIUM

5:BULGARIA | 6:CZECH | 7:DENMARK | 8: FINLAND | 9:FRANCE

10:HUNGARY | 11:ICELAND | 12:ITALY | 13: LUXEMBOURG

14:NETHERLAND | 15:NORWAY | 16:POLAND | 17: PORTUGAL

18:SLOVAKIA | 19: SPAIN | 20:SWEDEN | 21:SWITZERLAND

22:UK | 23:GERMANY | 24:GREECE | 25:Australia | 26:New Zealand

27:Hong Kong | 28:Singapore | 29:Morocco | 30:Ireland | 31:Malaysia

32:Russia | 33:Thailand | 34:Israel | 35:UAE | 36:China | 37:Ukraine

38:South Africa | 39:Korea | 40:Philippine | 41:India | 42:Turkey

254:Default | 255:Issue sys default countrycode

ras> voice config common countrycode 1 16

ras> voice config common save 1

Table 54   Auto-Provisioning Command Summary

voice config autopro index <index> 

Specifies the auto-provisioning entry for configuration.

voice config autopro active <index> 

<0:off|1:on> 

Enables or disables this auto-provisioning entry.

voice config autopro servaddr <index> <ip> 

Sets the auto-provisioning server IP address.

voice config autopro timeout <index> 

<seconds> 

Sets the auto-provisioning time out value. This is the 
amount of time that the ZyXEL Device waits for a 
response from the auto-provisioning. 

voice config autopro retry <index> 

<seconds>

Sets the auto-provisioning retry interval. This is the 
interval at which the ZyXEL Device will try to resend 
messages to the auto-provisioning server if it fails to get 
an acknowledgement response.

voice config autopro protocol <index> 

<0:TFTP|1:HTTP|2:HTTPS> 

Sets the protocol for sending the auto-provisioning 
configuration files.

voice config autopro method <index>  

<0:Common|1:Bluewin|2:Pincode>

Sets the method for sending auto-provisioning 
configuration files.

voice config autopro phonenumber <index> 

<phonenumber> 

Sets the phone number identfiying the auto-provisioning 
request. This is only necessary if the auto-provisioning 
server requires a phone number to authenticate an auto-
provisioning request.

voice config autopro pincode <index> 

<pincode> 

Sets the PIN code for this auto-provisioning request. This 
is only necessary if the auto-provisioning server requires 
a PIN code to authenticate an auto-provisioning request.