Barco 26-0405000-00 User Manual

Operational Configuration

The following topics are discussed in this section:

Use the following diagram as a recommended layout for your monitor.  

Figure 6-1.  Application Layout

For optimum viewing and utility, place your Program monitor in close proximity to the 
chassis, either above or immediately to the right.

As an excellent prerequisite to all operating procedures, it is recommended that you 
calibrate the Touch Screen.

„

Use the following steps to calibrate your Touch Screen display:

1.  If required, press {HOME} to display the Home Menu.

2.  Press {DISPLAY} to show the Display Settings Menu.

3.  Press {LCD CAL} to display the first Touch Screen Calibration Menu.  

4.  Follow directions on screen to complete the calibration procedure. 

On rare occasion, you can experience 

LOS (loss of signal) — typically due to a poor video 

or computer connection.  In these cases, PresentationPRO-II obeys a precise set of rules:

Scaler LOS — If there is a LOS for a video signal inside a scaler (PIP or KEY), 
the video switches to black, but the scaler remains in its current size and position.  

Background LOS — If there is a LOS for the background DVI input, the video 
switches to the background’s selected matte color.    

DSK LOS — If there is a LOS for the DSK, the system switches the DSK Off 
(specifically, selecting "

none" as the type).    

In each case, when the video signal recovers, the system re-enables it as before.

Program