Barco 26-0405000-00 User Manual

Working with Layers

5.  Adjust the PIP’s size, position, border, shadow, source image, cropping and 

"special effects" as desired.  Refer to the “

“ section on page 104.  

„

Use the following steps to remove a PIP from Program:

1.  Ensure that you have preset the desired transition type and rate.  Refer to the 

"

" section on page 115 for details.

2.  In the Layer Functions Section, ensure that the PIP button is blinking.  If not, 

press 

PIP to display the PIP Adjustment Menu.  On the Source Selection Bus, 

the source associated with the PIP will be lit solid.  

3.  In the Layer Functions Section, press CLEAR to "pend" the removal of the PIP.  

The 

CLEAR button will blink to indicate that the operation is pending. 

4.  In the Layer Functions Section, press TRANS.  The TRANS button lights during 

the interval, and at the conclusion of the transition, the 

Home Menu appears.

„

Use the following steps to cancel a PIP transition.  

S

Assumption:  A PIP transition has been selected, and the PIP button is 
blinking.

1.  In the Layer Functions Section, press PIP.  The button stops blinking, and the 

pending transition is cancelled.  Please note:

If there is no source currently on Program, the 

PIP button turns off.

If there is a source currently on Program, the 

PIP button stops blinking 

but remains lit.    

„

Use the following steps to change a PIP to a Key.  

S

Assumption:  A PIP is currently on Program.

1.  Ensure that you have preset the desired transition type and rate.  Refer to the 

"

" section on page 115 for details.

2.  In the Layer Functions Section, press KEY.  Please note:

The 

KEY button blinks and the PIP button remains lit solid.

The 

Key Menu appears, and the source associated with the PIP lights 

solid on the 

Source Selection Bus.

3.  If desired, select a new key source on the Source Selection Bus.  The pending 

source blinks and the current PIP source remains lit solid.  

Ensure that you establish the PIP’s initial size and position 
before your live event begins.

If you do not select a new source, the current source will be 
used.  It will transition off as a PIP, and back on as a Key.