Barco 26-0405000-00 User Manual

Safety Precautions

For all PresentationPRO-II installation procedures, please observe the following important 
safety and handling rules to avoid damage to yourself and the equipment:

To protect users from electric shock, ensure that the chassis connects to earth via 
the ground wire provided in the AC power Cord.

The AC Socket-outlet should be installed near the equipment and be easily 
accessible.

Before opening the PresentationPRO-II shipping box, inspect it for damage.  If you find any 
damage, notify the shipping carrier immediately for all claims adjustments.  As you open 
the box, compare its contents against the packing slip.  If you find any shortages, contact 
your sales representative. 

Once you have removed all the components from their packaging and checked that all the 
listed components are present, visually inspect the system to ensure there was no damage 
during shipping.  If there is damage, notify the shipping carrier immediately for all claims 
adjustments.

The environment in which you install your PresentationPRO-II should be clean, properly lit, 
free from static, and have adequate power, ventilation, and space for all components. 

The PresentationPRO-II chassis is designed to be rack mounted and is supplied with front 
rack-mount hardware.  Rear rack-mount brackets are available as a kit and are 
recommended for use when units are mounted in transit cases.  

When rack mounting the PresentationPRO-II chassis, remember the following important 
points:

Maximum ambient operating temperature for the unit is 40 degrees C. 

Leave at least one inch of space (front and rear) to ensure that the airflow through 
the fan and vent holes is not restricted. 

When installing multiple units into a rack, distribute them evenly to prevent 
hazardous conditions that may be created by uneven weight distribution. 

The PresentationPRO-II chassis can also be used in a 
“tabletop” configuration, without rack mounting.