Barco 26-0405000-00 User Manual

Input Connection Chart

The following 

Input Connection Chart is provided to assist with your connections.  Please 

note the following important points:

The mixer has eight analog input connections (scaled), and one SD-SDI input 
(SDI model) or one SD-SDI/HD-SDI input (HD model).  Additionally, there is one 
unscaled DVI connection that is shared between background and DSK.  

There is a direct correspondence between the first eight buttons on the 

Selection Bus and the eight numbered analog input connections.  No additional 
button-to-source configuration is required.

There is a direct correspondence between the SDI button in the 

Selection Bus and the SD-SDI (or SD-SDI/HD-SDI) input connection.  No 
additional button-to-source configuration is required.

The 

Analog inputs can also be used to connect composite, S-Video (Y/C) and 

component video.  In Chapter 2, refer to the “

” section on 

page 14 for details.

If a DVI source is connected to the 

BG/DSK input, it can be used for either a live 

background or the DSK (but not both simultaneously).  The mode for the 

BG/DSK 

button (either

 BG or DSK) is set on the BG/DSK Input Setup Menu.

Chart instructions:

Column 1 lists all input connectors.  

Column 2 lists additional connector details.  Remember that the DVI connector is 
digital only.  Be sure to check 

[ 

3

 ]

 the desired assignment of BG/DSK input.

In Column 3, please list the physical source that supplies the input signal.

In Column 4, please list any notes or details pertaining to the source.  

Complete the following 

Input Connection Chart for your system:  

Table 3-2.  Input Connection Chart

Analog Input 1

Scaled

Analog Input 2

Scaled

Analog Input 3

Scaled

Analog Input 4

Scaled

Analog Input 5

Scaled

Analog Input 6

Scaled

Analog Input 7

Scaled

Analog Input 8

Scaled

SDI Input

•  SD-SDI (SDI model), Scaled
•  SD-SDI/HD-HDI (HD model), Scaled

BG/DSK Input

Digital, Unscaled - BG [    ] DSK [    ]