Sanyo POA-PN03C User Manual

 

To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) straight cable 
with RJ-45 plug. There are two different types of cables depending on whether the network is 
constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distrib-
ute the network cable if required.

 Disconnect the AC plug from the projector.

  Connect the UTP straight cable to the LAN 

port on the network unit.

  Connect the UTP straight cable to the hub.

✐

  Use the UTP cross cable when you connect the computer and projector directly not using the 

hub.

✐

  When you connect the projector into the 10Base-T network, use cable with category 3 or 5. When 

you connect the projector into the 100Base-TX network, use cable with category 5.

✐

 The length of cable between hub and projector should be less than 100m.

Hub

(10Base-T, 100Base-TX)

UTP straight cable

Projector