ZyXEL Communications IES-612-51A User Manual
Chapter 4 Introducing the Web Configurator
IES-612-51A User’s Guide
64
IP Setup
Use this screen to configure the system and management IP addresses and
subnet masks.
subnet masks.
ENET Port Setup
Use this screen to configure settings for the Ethernet ports.
xDSL Port Setup
Use these screens for configuring settings for individual DSL ports.
xDSL Profiles Setup
Use these screens for configuring profiles for the DSL ports.
xDSL Line Data
Use these screens for viewing DSL line operating values, bit allocation and
performance counters.
performance counters.
Advanced
Application
Application
VLAN
Use these screens for viewing and configuring the VLAN settings.
IGMP
Use these screens to view IGMP status information and configure IGMP
settings and IGMP filters. You can also use these screens to set up bandwidth
requirements by multicast group or port and to set up limits on the number of
multicast groups to which a port can subscribe.
settings and IGMP filters. You can also use these screens to set up bandwidth
requirements by multicast group or port and to set up limits on the number of
multicast groups to which a port can subscribe.
Static Multicast
Use this screen to configure static multicast entries.
Multicast VLAN
Use these screens to set up multicast VLANs that can be shared among
different subscriber VLANs on the network.
different subscriber VLANs on the network.
Filtering
Use this screen to configure packet filtering.
MAC Filter
Use this screen to configure MAC filtering for each port.
Spanning Tree
Protocol
Protocol
Use these screens to display Rapid Spanning Tree Protocol (RSTP) information
and configure RSTP settings.
and configure RSTP settings.
Port Authentication
Use these screens to configure RADIUS and IEEE 802.1x security settings.
Port Security
Use this screen to limit the number of MAC address that can be learned on a
port.
port.
DHCP Relay
Use this screen to configure the DHCP relay settings.
DHCP Snoop
Use these screens to drop traffic from IP addresses not assigned by the DHCP
server and to look at a summary of the DHCP packets on each port.
server and to look at a summary of the DHCP packets on each port.
2684 Routed Mode
Use this screen to configure the IES-612-51A to handle 2684 routed mode
traffic.
traffic.
PPPoA to PPPoE
Use this screen to enable PPPoA-to-PPPoE conversions on each port.
DSCP
Use this screen to set up DSCP on each port and to convert DSCP values to
IEEE 802.1p values.
IEEE 802.1p values.
TLS PVC
Use this screen to set up Transparent LAN Service (VLAN stacking, Q-in-Q) on
each port.
each port.
ACL
Use this screen to set up Access Control Logic profiles and to assign them to
each PVC.
each PVC.
Downstream
Broadcast
Broadcast
Use this screen to block downstream broadcast packets from being sent to
specified VLANs on specified ports.
specified VLANs on specified ports.
SysLog
Use this screen to configure the syslog settings.
Access Control
Use this screen to configure service access control and configure SNMP and
remote management.
remote management.
Routing Protocol
Static Routing
Use this screen to configure static routes. A static route defines how the IES-
612-51A should forward traffic by configuring the TCP/IP parameters manually.
612-51A should forward traffic by configuring the TCP/IP parameters manually.
Alarm
Table 4 Web Configurator Screens (continued)
LABEL
DESCRIPTION