ZyXEL Communications IES-612-51A User Manual
Chapter 4 Introducing the Web Configurator
IES-612-51A User’s Guide
65
4.5 Changing Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Basic Setting and then User Account to display the User Account screen.
password. Click Basic Setting and then User Account to display the User Account screen.
Figure 17 User Account
Click the index number 1 to edit the default administrator account settings.
Alarm Status
Use these screens to view the alarms that are currently in the system.
Alarm Event Setup
Use these screens to view and set the severity levels of the alarms and where
the system is to send them.
the system is to send them.
Alarm Port Setup
Use this screen to set the alarm severity threshold for recording alarms on an
individual port(s).
individual port(s).
Management
Maintenance
Use this screen to perform firmware and configuration file maintenance as well
as restart the system.
as restart the system.
Diagnostic
Use this screen to view system logs and test port(s).
MAC Table
Use this screen to view the MAC addresses of devices attached to what ports.
ARP Table
Use this screen to view the MAC address to IP address resolution table.
Config Save
Config Save
Use this screen to save the device’s configuration into the nonvolatile memory
(the IES-612-51A’s storage that remains even if the IES-612-51A’s power is
turned off).
(the IES-612-51A’s storage that remains even if the IES-612-51A’s power is
turned off).
Table 4 Web Configurator Screens (continued)
LABEL
DESCRIPTION