Panasonic BT-H1700AE User Manual

This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This
equipment is designed for professional video appliances and can be used in the following environments:

● Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors

environment (far away from railways, transmitters, overhead power lines, etc.)

In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not
exceeding the following length:

The inrush current of this apparatus is 20.1 ampere.

Caution
When in case that the strong electromagnetic waves or magnetism is near the audio cable or the signal cable, the sound or the
picture will contain noise. In such case, please keep the cable away from the sources of the disturbance.

● It is not recommended to keep a certain still image

displayed on screen for a long time as well as displaying
extremely bright images on screen. This may cause a
burning (sticking) phenomenon on the screen of cathode-ray
tube. This problem does not occur as far as displaying
normal video playback motion images.

䡵 PRECAUTIONS

● Use only the power source specified on the unit.

(230 V AC, 50 Hz/60 Hz)

● Keep flammable material, water, and metal objects away

from the unit – especially the interior of the unit.

● This unit incorporates high voltage circuitry.

For your own safety and that of your equipment, do not
attempt to modify or disassemble this monitor.
There are no user-serviceable parts inside.

● Video or audio signals cannot be input to this monitor

without optional input cards.

● In these instructions, all explanations (except where noted)

refer to the BT-H1700AE with input cards installed.

䡵 HANDLING

● Avoid shocks or vibrations. These may damage the unit and

cause it to malfunction.

● Do not block the ventilation slots.

● Do not expose this unit to high temperatures.

Extended exposure to direct sunlight or a heater could
deform the cabinet or cause the performance of internal
components to deteriorate.

● Do not place the unit near appliances generating strong

electric or magnetic fields. They can generate picture noise
and instability.

● Keep the monitor clean by wiping the cabinet and CRT screen

with a piece of soft cloth. Do not apply thinner or benzine.
These chemicals can damage the finish and erase printed
letters. When the unit is excessively dirty, use a diluted neutral
cleanser, then wipe away the cleanser with a dry cloth.

● Do not use a magnet eraser to degauss the monitor’s

cathode ray tube from the outside. Doing so may distort its
aperture grill and cause a malfunction.

In order to prevent any fatal accidents caused by misoperation
or mishandling the monitor, be fully aware of all the following
precautions.

To prevent fire or shock hazard, do not expose this
monitor  to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of  the cabinet. When servicing the monitor,
consult qualified service personnel. Never try to service
it yourself.

Improper operations, in particular alternation of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, and
must therefore no longer be operated.

WARNING : THIS APPARATUS

MUST BE EARTHED.

Power cord

(attached cable)

2.0 m

Video signal cable

(coaxial cable)

2.0 m

Y/C signal cable

(shielded cable)

3.0 m

Audio signal cable

(shielded cable)

1.0 m

D-sub 9-pin cable

(shielded cable)

1.5 m

D-sub 15-pin cable

(shielded cable)

1.0 m

 LCT1261-001B (EN)

02.07.30, 10:13 AM

4