Panasonic BT-H1700AE User Manual

Lights when the tally control signal is ON. Set the MAKE/
TRIGGER terminal’s tally control in the REMOTE
(external control) terminal setup menu.  For details, refer
to Page 19.  The lamp color can be set to red or green.
To set the color, use TALLY SELECT in the "FUNCTION
SETTING" setup menu or MAKE/TRIGGER in the
REMOTE (external control) terminal setup menu.  For
details, refer to Page 15 and 19.

Adjusts picture hue. Turn the knob to the left to make the
picture redder, and turn it to the right to make the picture
greener.

Adjusts picture colour density. Turn the knob to the left to
make the picture colour lighter, and turn it to the right to
make the picture colour deeper.

Adjusts picture brightness. Turn the knob to the left to
make the picture darker, and turn it to the right to make
the picture brighter.

Adjusts picture contrast. Turn the knob to the left to make
the picture contrast lower, and turn it to the right to make
the picture contrast higher.

Adjusts the speaker volume. Pressing this button displays
the VOLUME level bar on the screen.  Pressing the
button again allows you to adjust speaker volume.

Pressing this button mutes the input sound. "MUTING
ON" is displayed on the screen.  Pressing the VOLUME
"–/+" button or the MUTING button restores the sound.
"MUTING OFF" is displayed on the screen.  On-screen
indications disappear after three seconds.
NOTE: The MUTING button functions even when nothing

is displayed on screen (such as Main, Setup
Menu, or Volume level bar ).  In this case,
"MUTING OFF" will not be displayed when the
VOLUME "–/+" button is pressed.

Pressing this button switches the input sound channel.
When the 

   button is pressed, the channel is advanced.

When the        button is pressed, channel is reversed.
NOTE: The channel indication will display a channel from

the group selected in the EMBEDDED setup
section of the FUNCTION SETTING menu.  It is
valid when an input card compliant with EMBED-
DED AUDIO is installed.

Selects menu screen items or set-up menu screen.

Displays, adjusts or closes a menu screen.

Press the DEGAUSS button. The button lights and
degaussing is performed automatically. When the
degaussing is completed, the light goes off.

Press the UNDER SCAN button. The button lights and
the screen is reduced (under-scan) and the whole screen
is displayed. When the UNDER SCAN button is pressed
while lit, the light goes off and the screen returns to
normal size (over-scan). Use this function to check the
whole screen.
NOTE: This function is invalid with the RGB-input screen.

Press the PULSE CROSS button. The picture is
separated into 4 parts. The synchronised signal displayed
in the shape of a cross separating the parts. The screen
automatically brightens to make it easier to confirm
synchronised sections easy. When the PULSE CROSS
button is pressed while lit, the light goes off and the
normal screen is restored.
NOTE: This function is invalid with the RGB-input screen.

!

!

 LCT1261-001A (EN)

02.6.25, 12:25 PM

6