Marantz R3001 User Manual

m Cursor 

1, 2, 3, 4) / OK buttons

(when AMP mode is selected)
Use these button when operating the SETUP MAIN 
MENU.

,  MENU OFF button

(when AMP mode is selected)
This button is used to exit from the SETUP MAIN 
MENU.

.  Numeric buttons 1 to 9 / Surround 

Numeric buttons
These buttons are used to enter fi gures in the se-
lection of a tuner preset station and station name 
preset or to set select a CD track number, etc. The 
functions of these buttons are dependent on the 
function button selected.

Surround mode buttons 
(when AMP mode is selected)
These buttons are used to select the surround 
mode.

⁄0  P.SCAN (Preset scan) / V(Video)-

(when TUNER mode is selected)
This button is used to start preset scan when 
SR3001 is selected TUNER mode.

(when AMP mode is selected)
This is used when switching the video signals from 
the various monitor outputs to Video-Off mode.

⁄1  0 / A/D button

0 button
This button is used to enter the number “0”

A/D button (when AMP mode is selected)
This is used to switch between the analog and digital 
inputs.

⁄2 CONTROL 

These buttons are used when operating the CD 
player, TAPE deck, etc.
The function of these buttons are dependent on 
the function button selected.
For the controllable functions of each input function, 
please refer to controllable function table on the page 
10.

⁄3  SUB-T (Title) / ATT (attenuator) 

When the input signal is too high and the voice 
distorts even while adjusting the SR3001 VOLUME 
control, turn on this function.  “ATT” is illuminated 
when this function is activated. 
The input level is reduced. Attenuator is invalid for  
the output signal of “REC OUT”.

This function is unavailable while the digital input is 
selected.

⁄4  INPUT/DISC+ / CH.SEL buttons

This button is used to enter the input level setup 
menu. 

⁄5 TREBLE 

3) /DOWN (4) 

These buttons are used to adjust the tone control 
of high frequency sound for left and right speaker.

⁄6 BASS 

3) /DOWN (4) buttons

These buttons are used to adjust the tone control 
of low frequency sound for left, right and subwoofer 
speaker.

⁄7 MEMO 

Memory enable button for various preset functions.

⁄8 CLEAR 

This button is used to cancel for certain memory or 
programming operations.

⁄9 DISPLAY 

Selects the display mode for the front display of the 
SR3001.

¤0 NIGHT 

Pressing this button prevents the Dolby Digital 
signal from playback at a loud voice. This function 
reduces the voice by 1/3 to 1/4 at maximum. Thus, 
it eliminates the occurrence of an abruptly loud 
voice at night. However, the function is valid only in 
the case when the  Dolby Digital  signal is entered 
into OPTICAL or COAXIAL and data to compress 
the voice exists in the signal to be played back.
When this button is pressed, the “NIGHT” indicator 
is illuminated.

The provided remote control unit is a universal 
remote controller. The POWER  button, numeric 
buttons and control buttons are used in common 
across different input source components.
The input source controlled with the remote control 
unit changes when one of the input selector but-
tons is pressed.

ENTER

3

2

1

6

5

4

9

8

0

7

,

m

n

b

v

c

x

z

⁄1

⁄2

⁄5

¤3

¤2
¤1
¤0
⁄9
⁄8
⁄7
⁄6

¤4

⁄4

⁄3

¤5

.
⁄0

z Transmitting 

Lights up during a button is pressed and an infra-
red signal is sending.

x  (Main) POWER buttons 

(when AMP mode is selected)
Press to switch the power of the SR3001 ON or 
OFF after pressing the AMP button.

c  Input selector buttons/ FUNCTION 

These buttons are used to select a Audio or Video 
source component. Press one of these buttons 
once to change the function of the remote control. 
Press same button within 2 seconds, the input 
function of the SR3001 is changed.

Audio function sources such as CD, TAPE, CDR/MD, 
and TUNER may be selected in conjunction with a 
Video source.
This feature (Sound Injection) combines a sound 
from one source with a picture from another.
Choose the video source fi rst, and then choose a 
different audio source to activate this function.

•  CDR/MD button is set CDR function at initial.  To 

switch MD function, press and hold down CDR/
MD button and press 2 button. 

•  To return CDR function, press and hold down CDR/

MD button and press 1 button.

v  MAIN VOLUME UP (

3) /DOWN (4) 

Main volume control of the SR3001. The front, 
surround, center and subwoofer channel volumes  
controlled by these buttons simultaneously.

b MUTE 

Muting button of the SR3001. Press this button 
decrease the sound  temporarily. Press this button 
again to return to the previous sound.
When this button is pressed, “MUTE” indicator 
lights up.

n MENU 

(when AMP mode is selected)
This button is used to enter the SETUP MAIN 
MENU.