Marantz R3001 User Manual

 

  If you fi nish these setup, press the 

3 or 4 

cursor button to select “TO MAIN MENU” then 
press the ENTER button to return the SETUP 
MENU.  

 

  Or press the 

1 or 2 cursor button to select 

“EXIT” then press the ENTER button to exit the 
SETUP MENU.

•  When a DTS-LD or DTS-CD is playing, this setup is 

not available. This is to avoid noise being generated 
from the analog input.

• If “Dx-AUTO” is selected and a DVD, compact disc 

or LD is fast forwarded during playback, decoded 
signals may produce a skipping sound. In such cases, 
change the setting to DIGITAL.

• Same digital input function cannot be set. In this 

case, the previous setting is set to ANALOG. 
Same digital input number cannot be set in Digital 
AUTO mode and Digital Fixed mode. For example, 
D1AUTO and DIG.1 are not set at same time.

•  The TUNER is fi xed to the analog input, and can not 

be selected for any digital input.

After you have installed the SR3001, connected all 
the components, and determined the speaker layout, 
it is now time to perform the settings in the Speaker 
Setup menu for the optimum sound acoustics for your 
environment and speaker layout.
Before you perform the following settings, it is 
important that you first determine the following 
characteristics:

When setting the speaker size in the SPEAKER 
SIZE sub-menu, use the guidelines given below.
Large: 

The complete frequency range for the channel you 
are setting will be output from the speaker.

Frequencies of the channel you are setting 
lower than approx. 100Hz will be output from the 
subwoofer.
If the Subwoofer is set to “NONE” and the front 
speakers are set to “Large,” then the sound may 
be output from both the left and right speakers.

ENTER

 

 

 

AAC

 

 

 

 

  Select “2.SPEAKER” in SETUP MENU with 

3 

or 

4 cursor button, 

 

 Press 

the 

ENTER  button to enter the menu. 

The fi rst sub-menu item is “2-1.Speakers Size” 
setup.

 

 Press 

3 or 4 cursor button to select the each 

speaker.

 

 Press 

1 or 2 cursor button to select the setting 

of size to each speaker.

 

  If you fi nish these setup, press the 

3 or 4 

cursor button to select “NEXT”.  

 

 Press 

the 

ENTER button to enter the next “2-2. 

Speakers Distance” setup.

 

  Or press the 

1 or 2 cursor button to select 

“EXIT” then press the ENTER button to exit the 
SETUP MENU.  

 

  Or press the 

1 or 2 cursor button to select “TO 

MAIN MENU” then press the ENTER button to 
return the SETUP MENU.

Speakers

Size

Select when a subwoofer is connected.

Select if the front speakers are large sized.

Select if the center speaker is small sized.

Select when a subwoofer is not connected.

Select if the front speakers are small sized.

Select if the center speaker is large sized.

Select if no center speaker is connected.

Select if no surround left and right speakers are connected.

Select if the surround left and right speakers are large sized.

Select if the surround left and right speakers are small sized.

Select if no surround back speaker is connected

Select if the surround back left and right speakers are connected

Select if the surround back speaker is connected

Select if the surround back speaker(s) is large sized

This menu (SB SIZE) will not be displayed, if SB is set "NONE".

Select if the surround back speaker(s) is small sized

Select this when the bass speaker is about 8cm(3 3/16inches)

Select this when the bass speaker is about 10cm(3 15/16inches)

Select this when the bass speaker is about 12cm(4 3/4inches)

MAIN MENU

exit SETUP

MENU

Speakers Distance

setup

TO MAIN

MENU

EXIT

NEXT

In this case, the audio signal is emitted form 
the Surround back L output terminal.