Marantz R3001 User Manual

 

  When you select “MANUAL” in T-MODE menu 

by pressing the 

1 or 2 button, this unit will emit 

a pink noise from the front left speaker. At this 
time, adjust the desired level of the master 
volume. Remember the level of this noise and 
then press the 

4 button. This unit will emit the 

pink noise from the center speaker.

 

 Using 

the 

1 and 2 cursor buttons, adjust the 

volume level of the noise from the center 
speaker so that it is the same level as the front 
left speaker (Note that this can be adjusted 
to any level between –10 and +10 dB in 1dB 
intervals).

Minimum

Maximum

1 dB interval

Reference

1 dB interval

 button

 button

 

 Press 

the 

4 cursor button again. This unit will 

now emit the pink noise from the front right 
speaker.

 

  Repeat steps 2 and 3 above for the front right 

and other speakers until all speakers are 
adjusted to the same volume level.

 

 Press 

the 

ENTER button, you can stop the test 

tone mode. Or press the 

1 or 2 cursor button to 

select “EXIT” then press the ENTER button to 
exit the SETUP MENU.

 

  Or press the 

1 or 2 button to select “RETURN” 

then press the ENTER button to return the 
previous “2-2. Speakers Distance” setup.

•  Speakers that you selected “None” for in the Speaker 

Size Setup menu will not appear.

• The setup level for each channel is memorized for 

reproduction in all surround mode by this method 
exclude CS mode, Multi channel stereo mode and 
7.1 ch input mode.

• To adjust the speaker levels for 7.1-channel input 

sources, you will need to use the 7.1CH Level Input 
setup menu.

Here you will set the volume for each speaker so that 
they are all heard by the listener at the same level. 
Moreover, if the T.TONE button is pressed, unit can 
enter into this menu directly.

The speaker level settings are not available in 7.1 
Channel Input mode, CS mode and Multi Channel 
Stereo mode.

 Selects “MANUAL” or “AUTO” for generating mode 
of test tone 

1 or 2 cursor button.

If you select “AUTO”  by pressing the 

4 button, the 

test tone will be cycled through in a circular pattern 
which is L (Left) →  C (Center) →  R (Right) →  SR 
(Surround Right) → SBR (Surround Back Right) → 
SBL (Surround Back Left) → SL (Surround Left) → 
SW (Subwoofer) → L →.. increments of 2 seconds 
for each channel.
Using the 

1 and 2 cursor buttons, adjust the volume 

level of the noise from the speaker so that it is the 
same level for all speaker.
Press the ENTER button, you can stop the test tone 
mode. Or press the 

1 or 2 cursor button to select 

“EXIT” then press the ENTER button to exit the 
SETUP MENU.  
Or press the 

1 or 2 cursor button to select “RETURN” 

then press the ENTER button to return the previous 
“2-2. Speakers Distance” setup.  

If you select “MANUAL”, adjust the output level of each 
speaker as follow.

AAC

3

2

1

6

5

4

ENTER

Channel level (speaker level) can be adjusted 
without using test tone.

Four channel level settings can be memorized for 
reproduction: the 7.1 ch input mode, CS mode, Multi 
channel stereo mode, and all other surround modes, 
respectively.

 

  Set the surround mode or 7.1 ch input mode 

which you want to adjust the channel level. 

 

 Press 

the 

CH.SEL button on the remote.

 

  Select the desired channel (speaker) with the 

1 

or 

2 cursor buttons.

 

  Adjust the level with the 

3 or 4 cursor buttons.

 

  After completing the setup, press the CH.SEL 

button again. 

EXIT

RETURN

TO MAIN MENU

Speaker

(Auto)

Speakers

Distance setup

MAIN

MENU

exit SETUP

MENU

Test Tone mode

Speakers

Distance

 setup

Direct selec

by remote

control

Listening

Positiom