Yamaha RX-V2700 User Manual

■

Use this feature to manually adjust the distance of each 
speaker and the delay applied to the respective channel. 
Ideally, each speaker should be the same distance from the 
main listening position. However, this is not possible in 
most home situations. Thus, a certain amount of delay 
must be applied to the sound from each speaker so that all 
sounds will arrive at the listening position at the same 
time.

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Initial setting: 
Front L/Front R/Presence L/Presence R/
Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.5 ft)
Surround L/Surround R/Surround Back L/
Surround Back R: 2.40 m (8.0 ft)
Control step: 0.1 m (0.5 ft)
• Select “Front L” to adjust the distance of the front left 

speaker.

• Select “Front R” to adjust the distance of the front right 

speaker.

• Select “Center” to adjust the distance of the center 

speaker.

• Select “Surround L” to adjust the distance of the 

surround left speaker.

• Select “Surround R” to adjust the distance of the 

surround right speaker.

• Select “Surround Back L” to adjust the distance of the 

surround back left speaker.

• Select “Surround Back R” to adjust the distance of the 

surround back right speaker.

• Select “Presence L” to adjust the distance of the 

presence left speaker.

• Select “Presence R” to adjust the distance of the 

presence right speaker.

• Select “Subwoofer” to adjust the distance of the 

subwoofer.

• You cannot adjust the distance of speakers set to “None” in 

Speaker Set.

• If you are only using one surround back speaker, connect it to 

the SURROUND BACK (SINGLE) jack, and adjust the 
distance in “Surround Back L”.

• “Center”, “Surround L”, “Surround R”, “Surround Back L”, 

“Surround Back R”, “Subwoofer”, “Presence L” and “Presence 
R” cannot be adjusted if “Center” (see page 96), “Surround” 
(see page 97), “Surround Back” (see page 97), “Bass Out” (see 
page 98) and “Presence” (see page 97) are set to “None” 
respectively.

• Instead of “Surround Back L” and “Surround Back R”, 

“Surround Back” is displayed if “Surround Back” is set to either 
“Small x1” or “Large x1” (see page 97).

Selects the unit for displaying the values of “Speaker 
Distance” parameter.
Choices: Meter (m), Feet (ft)
Initial setting:Feet (U.S.A. and Canada models)

Meter (Other models)

• Select “Meter” to input speaker distances in meters.
• Select “Feet” to input speaker distances in feet.