Yamaha RX-V2700 User Manual

You can clear all changes made in each function set, such 
as learned functions, macros, renamed input area names 
and setup remote control ID.

■

“CLEAR” appears in the display window.

If you do not complete each of the following steps within 30 
seconds, the clearing mode will be automatically canceled. 
In this case, start over from step 1.

k

n

L;CD (etc.) (L; Name of an input area)

Clears all learned functions in the respective 
input area. The name of a component is shown 
after a semicolon (;). Press an input selector 
button to select the input area.

L;AMP

Clears all learned functions for controlling the 
amplifier functions of this unit.

L;ALL

Clears all learned functions.

M;ALL

Clears all programmed macros.

RNAME

Clears all renamed source names.

FCTRY

Clears all remote functions and returns the 
remote to the factory settings.

“WAIT” appears in the display window. If clearing 
was successful, “C;OK” appears in the display 
window on the remote control.

y

Once you have cleared a learned function for a button, the 
button reverts to the factory setting (or to the manufacturer 
setting, if you have set remote control codes).

• “L;ALL” and “FCTRY” may take about 30 seconds to 

complete.

• “C;NG” appears in the display window if clearing was 

unsuccessful. In this case start over from step 2.

• “ERROR” appears in the display window if you press a 

button not indicated in the respective step, or if you press 
more than one button simultaneously.