Yamaha RX-V2700 User Manual

■

You can clear the function learned for a certain button in 
each control area.

The selected component name appears in the display 
window.

“LEARN” and the selected component name 
(ex. “DVD”) appear alternately in the display 
window.

• Do not press and hold LEARN. If you hold it down for 

more than 3 seconds, the remote control enters the remote 
control code setting mode.

• If you do not complete each of the following steps within 

30 seconds, the learning mode will be automatically 
canceled. In this case, start over from step 2.

“C;OK” appears in the display window if clearing 
was successful. Once “C;OK” appears in the display 
window on the remote control, release the ballpoint 
pen or similar object used to press CLEAR to exit the 
clearing mode. The remote control returns to the 
learning mode.

y

• If you continuously want to clear another function, repeat 

step 4.

• If you continuously want to clear another function for 

another component, press SELECT k / n to select the 
input area, then repeat step 4.

• Once you clear a learned function, the button reverts to the 

factory setting (or to the manufacturer setting if you have 
set remote control codes).

• “C;NG” appears in the display window on the remote control if 

clearing was unsuccessful. In this case, start over from step 2.

• “ERROR” appears in the display window if you press more than 

one button simultaneously.