Yamaha RX-V2700 User Manual

n

The parameter selected in “PARAM” is highlighted.
• Press l / h to adjust the parameter.
• Press k / n to adjust the “Gain”.
• Press ENTER to exit the edit window.

y

• When you select “Band” in step 3, you can use this menu 

as a graphic equalizer.

• The “Band #1” and “Band #2” can adjust the frequencies 

below of 198.4 Hz.

• When you select “Subwoofer” in step 1 and “Band” in 

step 3, you can adjust “Band #1” and “Band #2” only.

• For more information on the parametric equalizer, see 

page 89.

y

If you want to reset all “Parametric EQ” parameter settings 
for the selected speaker, select “RESET” and press ENTER.

■

Use this feature to adjust the balance of bass and treble 
output to your speakers or headphones.
Choices: Control, Bass, Treble, Audio Bypass

Tone Control is not effective when:

– PURE DIRECT (see page 52) is selected.
– MULTI CH INPUT is selected as the input source.

Choices: 

, Headphones

• Select “Speakers” to adjust the bass/treble balance of 

your speakers.

• Select “Headphones” to adjust the bass/treble balance 

of your headphones.

y

“Speaker” and “Headphone” adjustments are stored 
independently. The adjustments for “Speaker” affects the front 
left/right, center, presence left/right speaker channels and 
Subwoofer channel.

Use this feature to adjust low-frequencies output to your 
speakers or headphones.
Choices: 125 Hz, 

, 500 Hz

Control range:  – 6.0 dB to + 6.0 dB
Initial setting: 0.0 dB

Use this feature to adjust high-frequencies output to your 
speakers or headphones.
Choices: 2.5 kHz, 

, 8.0 kHz

Control range: – 6.0 dB to + 6.0 dB
Initial setting: 0.0 dB