Yamaha RX-V2700 User Manual

Use this feature to select whether the audio output 
bypasses the tone control circuitry when “TREBLE” and 
“BASS” are set to 0 dB (see page 52).
Choices: 

, Off

• Select “AUTO” if you want the signals to bypass the 

tone control circuitry to provide the purest signal 
possible.

• Select “OFF” if you do not want the signals to bypass 

the tone control circuitry.

■

Use this feature to adjust the overall audio settings of this 
unit.

Use this feature to adjust how much the mute function 
reduces the output volume.
Choices: 

, –20 dB

• Select “Full” to completely mute all the audio output.
• Select “–20 dB” to reduce the current volume by 20 dB.

Use this feature to delay the sound output and synchronize 
it with the video image. This may be necessary when 
using certain LCD monitors, projectors or high definition 
monitors.
Control range: 

 to 240 ms

Use this feature to set the maximum volume level in the 
main zone. This feature is useful to avoid the unexpected 
laud sound by mistake. For example, the original volume 
range is 16.5 dB to –80.0 dB. However, when “Max 
Volume” is set to –5.0 dB, the volume range becomes 
–5.0 dB to –80.0 dB.
Control range: 

,

15.0 dB to –30.0 dB

Control step: 5.0 dB

• When a test tone is output, the “Max Volume” setting is 

automatically deactivated because the volume level is 
automatically set to 0 dB regardless of the current “Max 
Volume” setting.

• The “Max Volume” setting takes priority over the “Initial 

Volume” setting (see page 91). For example, “Initial Volume” is 
set to –20.0 dB and then “Max Volume” is set to –30.0 dB, the 
volume level is automatically set to –30.0 dB when you turn on 
the power of this unit next time.

Use this feature to set the volume level of the main zone 
when the power of this unit is turned on.
Choices: 

, –80 dB to +16.5 dB

Control step: 0.5 dB