Xerox 5225A User Manual

8 Printer Environment Settings 

236

This section explains how to install the machine onto a NetWare network. The following 
information is provided:

Information Checklist – page 236
NetWare Environments – page 236
NetWare Installation – page 237
Installation Procedure – page 237
Network Communication Setup – page 238
NetWare Setup – page 239
Computer Setup – page 239
Test Print – page 239

Before installing the machine onto a network, make sure that the following items are 
available or have been performed.

If problems arise during the machine installation, refer to 

for assistance.

The machine supports NetWare PServer mode in Bindery or NDS. NetWare 3.x/4.x/
5.x/6.x is required to support Bindery. NetWare 4.11 or later is required to support NDS. 
In the PServer mode, the machine will function as a print server and print jobs from the 
print queue. The machine uses one file server user license.
NOTE: The machine does not support RPrinter mode.

An existing operational NetWare network is required. These procedures 
are not designed to install a NetWare network.

Customer

NetWare versions 3.x, 4.x, 5.x or 6.x

Customer

Obtain and record the following information, if required:
• IPv4 address
• Gateway address
• Subnet mask
• Host  name
NOTE: Only the IPv4 format is available for addresses.

Customer

Test the machine to make sure that it is fully installed and functioning 
correctly.

Customer

Install the print driver.

Customer