Xerox 5225A User Manual

Scan to Home Setup 

289

For more details about each protocol settings, refer to the following section:
FTP: 

HTTP/HTTPS: 

. For HTTPS, also refer to 

NetWare: 

A repository (folder) needs to be created on the server to hold scanned 
documents.

Create templates and repositories via CentreWare Internet Services.

On the control panel, select [Network Scanning].

Select a template from the list. You can change any other value from the control 
panel without impacting the template configuration; only the current job will be 
affected.

Load a sample document into the document feeder.

Press the <Start> button on the machine. The job is sent to the server using the 
protocol as defined within the template.

Log on to the server. Navigate to the repository (folder) that was specified earlier. 
Your scanned document is located in that repository.

NOTE: If the authentication feature is enabled for the Network Scanning service, a 
separate login screen appears when [Network Scanning] is selected on the All 
Services screen. Users can use the service after authenticated.

For more information about programming templates using CentreWare Internet 
Services, refer to 

The Scan to Home feature is supported through the Network Scanning service. 
Essentially, it is a template file (.xst) stored locally on the machine, but in a different 
directory than the Network Scanning templates or mailbox folders.

Templates are created via CentreWare 
Internet Services or any other Xerox 
Network Scanning Solutions.

Required

Refer to 

Repositories are created via CentreWare 
Internet Services or any other Xerox 
Network Scanning Solutions.

Required

Refer to 

Remote Authentication Server’s IP Address Optional

If Remote Authentication is required, 
then the Authentication feature needs to 
be enabled.