Xerox 5225A User Manual

Emptying the Hole Punch Waste Container (Optional) 

37

Hold the tabs on both sides of 
the new booklet staple 
cartridge, and insert it into the 
original position until it clicks.

NOTE: If you have trouble inserting 
the cartridge, make sure that the 
staples in the cartridge are properly 
in place.

Repeat steps 2 and 3 to replace the other booklet staple cartridge.

Close the side cover of the finisher.

NOTE: If the side cover is not completely closed, a message will appear and the 
machine will not operate.

The Hole Punch Unit for the Office Finisher LX contains a hole punch waste container. 
When the hole punch waste container becomes full, a message appears on the touch 
screen. When the message is displayed, empty the hole punch waste container.
Make sure to discard all paper chads when emptying the hole punch waste container. 
If you do not empty the container completely, the container becomes full before a 
message stating to empty the container appears again, and this can cause a 
breakdown of the machine.
NOTE: Make sure you empty the hole punch waste container when the power is on. If 
you empty the container when the power is off, the machine will not recognize that the 
container has been emptied.

Make sure that the machine is not 
operating, and open the front 
transport cover of the finisher.

Pull out the hole punch waste 
container.