SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

7

1.  Screw the mounting bracket into the camera’s  mounting hole, 

turning it clockwise.

2.  Mount the camera in the desired location no more than 60 feet from 

the DVR unless you have purchased additional wiring. You may wall 

mount or desk mount these cameras.

3.   Adjust cameras to the desired viewing angles.

1.  Plug the 4PIN DIN female connection 

on the camera into the 4PIN DIN male 
connection on the 60ft video/power wire. 

2.  Plug the camera’s power supply into one of 

the 4 ports of the power supply.

3.  Plug the four port power supply into the 

12 V adapter.

4.   Plug the power supply into the 12 V 

adapter.

5.  Attach all of the BNC to RCA adapters 

to the camera inputs and the monitor 
outputs on the back of the LCD/DVR.

6.  Connect the male RCA plug from the 60 

ft power wire to the BNC connectors on 
the channel inputs (1-4) on the back of 
the DVR.

7.  Plug the other end into the female end 

of the 3.5 mm wire from the camera.

Follow these instructions for the installation of each camera. The 60ft video/power wire has two connections: one for 

video out, and one for power.