SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

8

1.  Insert the power supply wire 

into the rear DC 12V Port on the 

LCD/DVR.

2.  Plug the mouse into the PS2 

port at the back of the LCD/DVR 

(recommended).

3.  Insert the power cord into the 

power supply.

4.  Plug the power cord into a 

power outlet.         

5.  Turn on the master switch on 

the back right of the system.            

6.  Press POWER on the top panel 

of the system if it doesn’t start 

after turning on the master 

switch.

NOTE:  We recommend using a surge protected power bar and/or 

Uninterrupted Power Supply (UPS) backup to prevent damage 
to your DVR system.