SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

10

There are certain circumstances where the system requires the user to enter text, such as system login, camera title 
setup, and so on. Below are the instructions on how to enter text using the remote control:

1.  Press ENTER to edit the highlighted option. The flashing cursor will be shown to indicate the editing point. 

To aid in finding which key represents which letter, a keypad legend will be shown as below.

 

2.  Press

 ◄► to move the cursor to the left/right.

3.  Press #/code in text editing mode to change text case. (If you are in the number only mode, pressing #/

code will have no effects.) Indicators on the screen show the current setting:

123 = Number only

abc = No capital letters

ABC = All capital letters

CODE = Internal code for the selected language, such as Chinese, Japanese, etc.

4.  Press 2 for “2”, “a/A”, “b/B”, “c/C”. 5 for “j/J”, “k/K”, “l/L”. MUTE for “6”, “m/M”, “n/N”, “o/O”. Please refer to the 

Keyboard legend for any other alpha-numeric entries.

5.  Press */mark to bring up a list of punctuation marks and special characters. The highlighted character in 

the list shows the selected one. Press 

▲▼◄► to change the selection.

6.  If you make a mistake, press BS (

▲) to remove the character to the left of the cursor, or press DEL (▼) to 

delete the character at the current cursor position.

7.  In text editing mode, internal code box, and mark list, press ENTER to exit and save changes, press ESC/

PTZ to exit without making changes.