SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

15

In Menu display, press 

▲▼ to 

change the highlighted option to 

Video Adjustment, and then 
press ENTER to call up Video 

Adjustment display as shown.

There are 4 items which can be adjusted, including Brightness, Contrast, Hue, and Saturation. The operations are as below:

•

▲▼ -  Press these buttons to select the items.

•  Numeric (CH1 – CH4) - Press these buttons to select the camera you wish to adjust .

•  (+/-)  Press these buttons to adjust the selected item.

•  SEQ - Press this button to reset the settings for this camera to factory default values.

•  CALL - Press this button to reset the settings for all cameras to factory default values.

•  MODE - Press this button to restore the values to original setting.

•  ESC (MENU/ESC) - Press this button to escape from this screen, and return to Menu display. The settings 

will be saved for future reference.

In Menu display, press 

▲▼ to 

change the highlighted option to 

Backup Device, and then press 

ENTER to call up Backup Device 

display as shown below.

The system supports a variety of USB 2.0 storage devices. (It will also support USB 1.0)
The operations are as below:

•

▲▼◄►Press these buttons to select the items.

•  ESC (MENU/ESC) -Press this button to escape from this screen, and return to previous display.

•  Connect/Disconnect – If the backup device is disconnected (as shown in Current Status), please plug 

the device in one of the backup ports (USB) and/or insert a DVD for DVD device, and then press ENTER 

to command the system to connect with it. If the device is already connected (E.g. R/W - Read/write, as 

shown in Current Status), please press ENTER to command the system software to disconnect with the 

device, and then unplug the device from the backup port.