SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

25

•  Post-record – to define how long after this alarm input is triggered the Focus Camera shall be intensively 

recorded at Event Record IPS. Press +/- buttons to adjust the value (0 second - 60 minutes, discrete).

•  Alarm Out – to define which Alarm Output will be triggered when this alarm input is triggered. Press +/- 

buttons to select none (N/A) or one of the Alarm Outputs (1-2).

•  Buzzer – to activate the internal Buzzer or not when this alarm input is triggered. Press ENTER or +/- to check/

uncheck this item. The default setting is “” - checked.

•  Log – allows you to either log an event or not. Press ENTER or +/- to check/uncheck this item. The default setting 

is “” - checked.

•  Screen Message – to display the event message on the screen or not. Press ENTER or +/- to check/uncheck this 

item. The default setting is “” - checked.

•  E-mail – to send an event e-mail to a pre-determined email  or not. The e-mail will be sent to the predefined 

receivers when the event is triggered. Press ENTER or +/- to check/uncheck this item. The default setting is “–” - 

unchecked.

The general operations are as below:

•

▲▼◄►- Press these buttons to select the items.

•  Numeric (CH1-CH4) - Press these buttons to select the alarm input.

•  COPY (   ) - Press this button to copy the settings of the focus alarm input to all the following alarm inputs. 

(E.g. focus alarm input is 1, its settings will be copied to those of alarm inputs 2-4.)

•  ESC (MENU/ESC) - Press this button to escape from this screen, and return to Setup Menu display. If the Save 

dialog is shown, press ENTER to exit and save, ESC (MENU/ESC) to exit without saving.

In Setup Menu display, press 

▲▼ 

to change the highlighted option 

to SEQ Display, and then press 

ENTER to call up SEQ Display Setup 

as shown.

The SEQ Display Setup allows the administrator to define the display pages while in SEQ Display for main monitor and 

call monitor. There are 1 display type - 1-Window for main monitor, and 1 display type for call monitor.