SVAT Electronics CLEARVU11 User Manual

now you can see

CLEARVU11

27

In Setup Menu display, press 

▲▼ 

to change the highlighted option 

to Scheduled Record, and then 

press ENTER to call up Scheduled 

Record Setup as shown

The Scheduled Record Setup allows the administrator to define when and how to record with the system. There are up 

to 16 time segments (T1 – T16) for each weekday. Each time segment will allow you to set up recording settings for 

certain periods of the day. 

To set up the time segments:

-  Select the day of the week you wish to setup.
-  Choose what time you want this segment to start (e.g. 9 am, when you open your business)
-  Set up the alarm, motion and normal recording settings for this time. A/V stands for Audio and Visual, A for 

audio, V for visual, No for no alarm. (e.g. you may wish to set them all for no, since you will be there at 9 am)

-  Set up the next time segment the same way. The end time of this time segment is implicitly set as the start 

time of next time segment, or the start time of the first time segment of the same weekday if it is the last 

one. (e.g. you may wish to set up  the motion and alarm settings to start at 12 noon, since you will be gone 

for lunch. Therefore, from 9 am to 12 noon, there are not alarm or motion settings, at 12 noon it will start to 

detect motion and alarms)

-  Continue to do this until you have scheduled the entire day. (e.g. Noon-5 no action, 5pm-midnight motion 

and alarm, start the next day at midnight until 9 am etc.) 

Following is a brief description for each item and its specific operations:

•  Start – the start time of the time segment, which will go up in increments of 30 minutes. (The end time of 

this time segment is implicitly set as the start time of next time segment, or the start time of the first time 

segment of the same weekday if it is the last one.) Press +/- buttons to select the desired start time.

 Example: If the user sets the start time of T1/MON as 9:00, T2/MON as 18:00, T3-T16/MON as N/A 

(Not Available), then T1/MON is 9:00-18:00, T2/MON is 0:00-9:00, and 18:00-24:00.

•  Alarm – record mode (No, Video, or Audio/Video) when certain alarm input is triggered. Press +/- buttons 

to change the value.

•  Motion – record mode (No, Video, or Audio/Video) when motion is detected for a selected camera. Press 

+/- buttons to change the value.