Panasonic NV-DS30A User Manual

Page of 60
13
Using the Viewfinder/LCD Monitor
ª Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the 
displays inside the Viewfinder become clear and easy to read.
1
Tilt the Viewfinder upward.
2
Adjust by sliding the Eyepiece Corrector Knob 
1
.
ª Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while 
watching it.
1
1
1
1
Press the [PUSH OPEN] Button and, at the same 
time, bring the LCD Monitor out about 90
o in the 
direction of the arrow.
≥The Viewfinder goes off.
2
2
2
2
Adjust the LCD Monitor angle according to the 
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180o 
2
 from the 
vertical position to the upward direction and a maximum of 
90
3
 to the downward direction. Forcefully rotating the LCD 
Monitor beyond these ranges will damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ª Adjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or [VCR 
FUNCTIONS] Main-Menu is selected, the following items are 
displayed. (
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and then 
turn the [PUSH] Dial to raise or lower the number of vertical bars in 
the Bar Indication.
≥A larger number of vertical bars indicates stronger brightness or 
colour saturation.
≥For other notes concerning this item, see page 53.
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
12:30:45
15.10.2002
2
3
2
180x
90x
PRESS MENU TO RETURN
LCD/EVF SETUP
LCD BRIGHTNESS
   [-]||||----[+]
LCD COLOUR
   [-]||||----[+]
EVF BRIGHTNESS
   [-]||||----[+]
1
1
1
2
1
PUSH
OPEN
A-ENG.book  13 ページ  2002年1月28日 月曜日 午前11時32分