Adtran 616 User Manual
Total Access 600 Series System Manual
Section 4 User Interface Guide
61200624L1-1B
© 2004 ADTRAN, Inc.
149
S
ECURITY
> R
ADIUS
S
ERVER
> R
ETRY
C
OUNT
(1-10)
This is the number of times the unit should send a request packet tho the
R
ADIUS
S
ERVER
without a
response before giving up. If the number of attempts to communicate with the primary server is equal to
the retry count, the second server (if defined) is tried. If the second server does not respond within the retry
count the third server (if defined) is tried. If the third server does not respond within the retry count, the
Telnet session is not authenticated and is dropped. The default is
the retry count, the second server (if defined) is tried. If the second server does not respond within the retry
count the third server (if defined) is tried. If the third server does not respond within the retry count, the
Telnet session is not authenticated and is dropped. The default is
5
.
DS0 M
APS
The
DS0 M
APS
menu allows you to map data and voice ports to the network T1 time slots. You may edit
either of the two maps at any time. If you make changes to the current map, only those DS0s that have
changed will be updated (unchanged DS0s will not be affected.) The DS0 menu is shown in Figure 12.
changed will be updated (unchanged DS0s will not be affected.) The DS0 menu is shown in Figure 12.
Figure 12. DS0 Maps Menu
The DS0 Maps configuration fields only apply for T1 TDM applications.