Adtran 616 User Manual

 Network Turnup Procedure

Total Access 600 Series System Manual

 40

© 2004 ADTRAN, Inc.

61200624L1-1B

The Total Access 612/616/624 mount and connect with standard fasteners and hand tools:
•

Rackmount brackets (19”–P/N 1200627L1 or 23”–P/N 1200627L2)

•

Flat head screwdriver (medium)

•

Two Phillips head screwdrivers (small/medium)

•

Wire-wrap gun (optional)

•

25-pair male amphenol cable (customer connection)

•

Selected punch-down block and tool

Follow these steps to rackmount the Total Access 612/616/624:

The Total Access 600 Series is not offered in DC powered versions. However, optional DC battery backup 
systems are available for the Total Access 604/608 (P/N 1200641L1) and Total Access 612/616/624

 

(P/N 1175044L1, 2, or 4) systems. 

The AC powered unit comes equipped with a 3-prong, detachable power cord for connecting to a properly 
grounded power receptacle. As shipped, the unit is set to factory default conditions. After installing the 
unit it is ready for power-up. To apply power to the unit, ensure that it is properly connected to an 
appropriate power source.

1.

Remove the wallmount brackets. (The Total Access 612/616/624 ships with wallmount 
brackets attached.) Attach the mounting brackets to the side of the unit.

To avoid damaging the unit, use only the screws included in the mounting bracket 
shipment when attaching mounting ears to the chassis.

2.

Position the Total Access 612/616/624 in a stationary equipment rack. This unit takes 
up 1 RU of space. To allow proper grounding, scrape the paint from the rack around 
the mounting holes where the Total Access 612/616/624 will be positioned.

3.

Have someone else hold the unit in position as you install two mounting bolts through 
the unit’s brackets and into the equipment rack using a #2 Phillip’s screwdriver.

4.

Proceed to the steps given in Supplying Power to the Unit.