Adtran 616 User Manual

Total Access 600 Series System Manual

Section 4  User Interface Guide

61200624L1-1B

© 2004 ADTRAN, Inc.

75

View the network SHDSL interface status and configure SHDSL parameters from this menu. These menus 
are only applicable to SHDSL Total Access 600 Series systems.

Configure the various SHDSL parameters.

Choices are 

 (Network Terminating Unit) or 

(Line Terminating Unit). Select 

 when the unit 

is connected to the SHDSL network device. Select 

 when the unit is expected to function as the 

SHDSL network device. In back-to-back applications, one unit must be set to 

 and the other for 

.

Configures the G.shdsl signaling method as either 

 or 

. Total Access 600 Series units also 

support an auto detection signaling method (

) which allows the unit to detect the signaling 

method on the link and signal accordingly.

Configures the G.shdsl signaling as either standard 

or 

.

Configures the SHDSL interface to be either variable rate speeds (

) or a fixed rate (

). If the 

system is configured for a fixed rate, the link will only train at the specified rate. The DSLAM setting must 
match the configured rate when using fixed rates.

Displays the SHDSL interface status including configuration modes and data rates.

Indicates the current training state for the SHDSL interface as either trained, currently training, etc.

Displays the current configured mode of operation on the SHDSL link as either NTU or LTU.

Displays the negotiated data rate on the SHDSL link.

Displays the framing of the SHDSL link as either framed or unframed.