Sharp PG-M25X Operating Guide

"On-screen Display (Example)

Using
Analog RGB

Using
Component

•

Each press switches in the following
order’

→ INPUT 1 → INPUT 2 → INPUT 3 → INPUT 4

•

You can also use the 

 on the

GyroRemote.

Note

•

When no signal is received, “NO
SIGNAL” will be displayed. When a
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.

•

When Auto Search is ON, the input
modes with signals can be selected
(See page 91.)

•

When a PC card is inserted, the
input will automatically change to
INPUT 4.

•

You can select the input mode
directly by using the Button Assign
function on the GyroRemote (See
page 41.)

Used for projecting im-
ages from equipment that
sends RGB signals or
Component  signals con-
nected to the DVI-DIGI-
TAL/ANALOG input port.
Used for projecting im-
ages  from equipment
connected to the S-
VIDEO input terminal.
Used for projecting im-
ages   from equipment
connected to the VIDEO
input terminal.
When projecting from a
wireless LAN PC card or
a memory card.

INPUT 1
(RGB/
Component)

INPUT 2
(S-Video)

INPUT 3
(Video)

INPUT 4
(PC Card)

Note

•

Pressing 

 will raise the volume.

Pressing 

 will lower the volume.

•

On the GyroRemote, the volume can
be adjusted by pressing 

.

•

When a PC card is installed, 

 , 

on the projector or 

 on the

GyroRemote operate as cursor
buttons (\, |) when the OSD menu
is active.

Using
DVI digital

   Using S-Video

   Using Video

PC Card installed

PG-M25X#E#p33_49.p65

02.4.29, 3:11 PM

35