Sharp PG-M25X Operating Guide
Easy to Use Functions
-69
Network Settings
Note
•
This section explains items that can be set in a network. A wireless connection will not be possible if these
items are not set correctly.
items are not set correctly.
•
Also, as there are values that must be entered in a pre-configured network, make sure to consult with your
network administrator.
network administrator.
Setting Up a Projector Name
This Network setting assigns a name to the pro-
jector. The default setting is “MY PROJECTOR”.
jector. The default setting is “MY PROJECTOR”.
When selecting “Projector” in the net-
work menu on the menu screen
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
work menu on the menu screen
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1
Press
or
to select
“Projector” and then press
.
2
Press
in “Name”.
3
Press
or
to select
the characters you want to set.
Note
•
The following characters can be entered:
Letters (A-Z), numbers (0 – 9) or symbols
(–, _, ( )).
Letters (A-Z), numbers (0 – 9) or symbols
(–, _, ( )).
•
Pressing
or
switches
between procedures as shown below.
•
If you want to delete one charactor to the
left, select “BS” by pressing
or
and press
.
•
The projector name is displayed when the
projector has been found via the computer.
projector has been found via the computer.
4
Press
.
Note
•
If you want to correct a letter or symbol,
press
or
to move the cursor to the
character you want to correct, and then use
or
to correct the character.
•
Characters can also be selected using
on the GyroRemote.
•
If you want to cancel the settings, press
.
PG-M25X#E#p65_77.p65
02.4.29, 3:18 PM
69