Sharp PG-M25X Operating Guide
70
Network Settings (cont.)
-70
5
Repeat steps 3 and 4 to enter the
remaining characters you want.
Note
•
A maximum of 16 characters can be
entered
entered
6
Press
.
•
The settings are stored and active.
Setting the IP Address
Set the IP Address of the projector.
Set “TCP/IP” in the network menu on the
menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1
Press
or
to select
TCP/IP and then press
.
2
Press
or
to select
“IP Address”, and then press
.
3
Press
or
to select
the values you want to set.
4
Press
or
to move the
cursor to the digit you want to
correct.
correct.
Note
•
You can also move the cursor by pressing
on the GyroRemote.
•
If you want to cancel the settings, press
.
PG-M25X#E#p65_77.p65
02.4.29, 3:18 PM
70