Sharp PG-M25X Operating Guide
72
Network Settings (cont.)
-72
Setting the SSID
Set the projector’s SSID.
The default setting is “SHARP_PRJ”.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network
menu on the menu screen
menu on the menu screen
➝ For operating the menu screen, see
pages 50 and 52.
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
the GyroRemote see pages 54 and 55.
1
Press
or
to select
“Wireless LAN” and then press
.
2
Press
or
to select
“SS ID” and then press
.
3
Press
or
to select
the characters you want to set.
Note
•
The characters can be entered fllowing:
Letters (A to Z), numerical (0 to 9),
symbols (–, _, ( ))
Letters (A to Z), numerical (0 to 9),
symbols (–, _, ( ))
•
If you want to delete one character to the
left, select “BS” and press
.
4
Press
.
•
You can also move the cursor using
on the GyroRemote.
Note
•
If you want to correct a letter or symbol,
press
or
to move the cursor to the
character you want to correct, and then use
or
to correct the character.
•
If you want to cancel the settings, press
.
5
Repeat steps 2 and 3 to set all
the characters.
the characters.
Note
•
A maximum of 16 characters can be set.
6
Press
.
•
The settings are enabled.
PG-M25X#E#p65_77.p65
02.4.29, 3:19 PM
72