Panasonic 1210 User Manual

Your IP Phone 1210 supports both AC power and PoE options, 

including IEEE 802.3 standard power. To use local AC power, you can 
order separately the optional AC adapter. To use PoE, where power is 
delivered over the CAT5 cable, the LAN must support PoE, and you 
do not need an AC adapter.

Connect your IP Phone to your LAN using a 

CAT5e

 Ethernet cable to 

enable full functionality of your IP Phone. If your Ethernet port is equipped 
with Power over Ethernet (PoE), your IP Phone can be powered through 
the LAN port. Do not extend the LAN Ethernet cable outside the building.

1. Plug one end of the supplied LAN Ethernet cable into the LAN 

Ethernet port on the back of your IP Phone marked with the 

%

 

symbol. 

2. Thread the cable through the channel in the foot stand.

3. Connect the other end of the cable to your LAN Ethernet connection.

The LAN LED on the back of the IP Phone lights when a LAN 
connection is established.

 shows the connections on the back of the IP 

Phone.

Connect the 

CAT5e

 PC Ethernet cable between your IP Phone and your 

computer to enable your computer to access the LAN.

1. Plug one end of the PC Ethernet cable (not supplied) into the PC 

Ethernet port on the back of your IP Phone marked with the 

(

 symbol. 

2. Thread the cable through the channel in the foot stand.

3. Connect the other end of the cable to the LAN port on your computer.