Magnavox 32MD301B User Manual

21

English

INTR

ODUCTION 

PREP

ARA

TION 

W

ATCHING TV 

USING FUNCTIONS

OPERA

TING D

VD

CONNECTING DEVICES

INFORMA

TION 

USEFUL TIPS

 

Make sure the unit is connected to antenna or cable.

1

 Use 

▲/▼ to select the item you want to adjust, then press 

OK.

 

 

2

  Adjust the following items.

Autoprogram

If you switch wires (e.g. between antenna and CATV) or if you 
move the unit to a different area after the initial setting, or if 
you restore the DTV channels you deleted, it is recommended 
to use Autoprogram to perform a new channel search.

1

 Use 

▲/▼ to select [Autoprogram], then press OK.

2 

Use ▲/▼ to select an appropriate option, then press OK.

 

Autoprogram will rescan all channels.

Auto programming may take more than 20 

 minutes to complete.

Select your signal source.

•  When connected to VHF / UHF antenna, select [Antenna].
•  When connected to CATV, select [Cable].
•  [Autoprogram] will begin.

Please wait while the system is scanning for channels.

Auto programming may take more than 20 minutes to complete.

•  When the scanning and memorizing are completed, the 

lowest memorized channel will be displayed.

Note

 

• After setting [Autoprogram], using CH + / − on the remote control 

skips unavailable programs automatically.

 

•  If you are not receiving a signal from your cable service, contact 

the Cable provider.

 

• If you press   or MENU during autoprogram, the setup of TV 

channels will be canceled.

 

• Even if [Autoprogram] is completed, the channel setting will be 

lost if the AC power cord is unplugged before the unit goes into 

standby mode by pressing  .

 

• The PIN code will be required once you set a PIN code in the 

[Child Lock]. 

➠

 p. 23

 

• If you want to change your PIN code, follow the instruction of 

[Change PIN]. 

➠

 p. 25

Channel List

The channels selected here can be skipped when selecting the 
channels using CH + / −.
Those channels can still be selected with the Number buttons.

1

 Use 

▲/▼ to select [Channel List], then press OK.

2

 Use 

▲/▼ to select the channel you want to remove, then 

press OK.

 

Highlight channels for 

Ch Up / Down key selection.

•  The channel display for the removed channel darkens. 

You will not be able to select the channel again using 

CH + / −.

•  To reactivate a removed channel, use ▲/▼ and press 

OK. The registered channels are highlighted.

•  When you remove a main channel, its subchannels are 

removed as well.

Note

 

• The channel with the [DTV] indicated on the display is ATSC.

Otherwise the channel is NTSC.