Magnavox 32MD301B User Manual

22

Add Channels

This function lets you add the off the air along NTSC or analog 
Cable channels that were not added by the autoprogram due 
to reception conditions at the initial setting.

1

 Use 

▲/▼ to select [Add Channels], then press OK.

2

 Use 

the Number buttons to enter the number of the 

channel you want to add, then press OK.

For analog channels, select a

channel to be added using

number keys.
For digital channels, you must

perform Autoprogram function.

Note

 

• If setup completes successfully, [Added to the channel list.] is 

displayed.

 

• If external input is used, it is not possible to register the channel 

and [Unavailable] will be displayed on the TV screen.

 

• By using CH + / −, you can select the memorized channels only.

Antenna Confi rmation

This function lets you check the digital signal strength of each 
channel.

1

 Use 

▲/▼ to select [Antenna], then press OK.

2

 Use 

the Number buttons or CH + / − to select the channel 

for which you want to check the digital signal strength.

 

  

Note

 

• If the channel is set to analog channel or external input, you 

cannot confi rm the antenna condition.

1

 Use 

▲/▼ to select the item you want to adjust, then press 

OK.

 

 

*

*

 

 [PC Settings] will only display for 22MD311B, 19MD311B or 

19MD301B.

2

  Adjust the following items.

Closed Caption

You can view closed captioning (CC) for TV programs, 
movies and news. Closed caption refers to text of dialog or 
descriptions displayed on-screen.

Use ▲/▼ to select [Closed Caption], then press OK.
See the following description for setting each item.

 

A

B

C

 

1

 Use 

▲/▼ to select [Caption Service], then press OK.

2

 Use 

▲/▼ to select the desired closed caption, then press 

OK.

Select if you do not want caption service.

The primary caption and text services. The 

captioning or text is displayed in the same language 

as the program’s dialog (up to 4 lines of script on the 

TV screen, where it does not obstruct relevant parts 

of the picture).

Serve as the preferred data channels.

The captioning or text is often a secondary 

language.

Rarely available and broadcasters use them only in 

special conditions, such as when [CC-1] and [CC-3] 

or [T-1] and [T-3] are not available.

•  There are 3 display modes according to programs:

Displays input characters on the TV screen 

immediately.

Pop-on mode Once characters are stored in memory, they are 

displayed all at once.

Roll-up mode Displays the characters continuously by scrolling 

(max. 4 lines).