Panasonic VL-SW250BX User Manual

 Insert the battery.

A Align the terminals and insert.
B Close the battery cover.

L

The battery level is displayed 
as  .

Terminals

A

Do not remove the 
pad at the back of 
the battery cover.

B

Assemble the charger stand, and plug the AC adaptor into the power outlet (100 – 240 V AC).

N

A  Plug the connector of the AC adaptor into the 

jack on the charger.

L

You can pull out the AC adaptor cord to the 
left or right side.

B Attach the charger stand.

B

A

N

Pressing the tab, pull the charger stand to detach.

Tab

3  

Place the sub monitor station on the charger and charge the battery.
While charging: The CHARGE indicator lights up.
When charging is complete: The CHARGE indicator turns off.

L

At the fi rst time of charging or after battery replacement, it takes about 7 hours to complete charging.

L

If you use the sub monitor station while charging, the charging time becomes longer.

L

Locate the charger where “OUT OF RANGE” is not displayed on the sub monitor station.
(The charging time becomes longer where the sub monitor station is out of range of the main monitor station.)

L

Even after the sub monitor station is fully charged, the sub monitor station can be left on the charger without 
any ill effect on the batteries.

Important:
L

Use only the included AC adaptor.

L

When the sub monitor station is off the charger or the AC adaptor is disconnected for 1 week or more, remove 
the battery in order to maintain the battery performance and prevent the battery from discharging.

– Recharge the battery before using the sub monitor station again.

Charge contacts
(Metallic parts)

CHARGE indicator

AC adaptor

Power outlet
( 100 – 240 V AC, 50/60 Hz)

Charge contacts
(Metallic parts)

SW250BX_OI.indb   16

SW250BX_OI.indb   16

2010/08/25   15:58:30

2010/08/25   15:58:30