Honeywell HD-16DVR-C User Manual

Overview of Navigation and Controls 

 

38 

  Show message: The system will send message to the local host screen 

to alarm you if you have enabled this function. 

  Send email: The system can send out an email to alert you when the 

alarm occurs.  

  PTZ activation: Here you can set PTZ movement (of any video 

channels) such as going to a preset when motion is detected in the 
current video channel. Click Select, and you can see an interface is 
shown as in 

. 

 Period: 

Click 

Set to determine the period for the channel to be armed 

for motion detection. See the interface shown as in 

you can set for business days and non-business days. In 

click Set, and you will see an interface as shown in 

you can set your own business day and non-business day. 

  Alarm output: After the motion detection has occurred, the system 

enables the peripheral alarm devices. 

  Tour: Here you can enable the tour function when the alarm occurs.  It 

is a one-window tour. Please go to 

setup. 

Note 

If there are record channels selected, only the record 
channels will be displayed in the tour. 

  Video Matrix: when the motion is detected, video will be displayed on 

the monitor connected to the SPOT (matrix) output of the DVR. 

Check boxes to select the corresponding function. After all the settings, 
click Save, and the system will return to the previous menu. 

Note 

In 

, you can left click the mouse and drag it to 

set a region for motion detection. Click Fn to switch 
between arm/withdraw motion detection. After setting the 
region, click the enter button to exit.