Samsung SDS-P5102/P5122 User Manual

 

main menu

main menu

SETTING THE EVENT

You can set recording options when motion, image loss detection or tampering event occurs.

Motion Detection

You can set target detection region and motion, as well as the alarm signal output.

When the motion detection region is set, it detects motion within the area.

Using the mouse may help make setup easier.

1.  Press the [MENU] button on the remote control.
2.  Use the left/right button (_ +) to select <Event>.

Event setting menu is selected.

3.  Use the up/down buttons (▲▼) in <Event> window to 

move to <Motion Detection>, and press [ENTER] button.

A window of motion detection area setup appears.

4.  Use direction buttons (▲▼_ +) to move to a desired 

item, and set the value.

Mode : Sets whether to activate motion detection.

Sensitivity : Sets the sensitivity level of the motion detection.

Alarm : Sets the alarm output method.

 `

For further information on alarm output, refer to “HDD Alarm > 

Alarm”. (Page 49)

Alarm Duration : Sets the duration of alarm signal and alarm sound.

5.  When the motion detection setup is done, press <OK>.

Setting the Motion Detection Area

 Select <Motion Region>. 

 When “Motion Region” window appears, select a 

channel for detection and set the area of motion 

detection.

To set the area in “Motion Region” window

In the “Motion Region” window, select desired region 

from <

>.

To set the area using <Individual> selection

In the “Motion Region” window, you can select cells 

individually by using <Individual>.
When selected <Individual>, “Motion Region” window disappears and you can select cells one by 

one.When the motion area setup is done, press the <Menu> on the screen or the [MENU] button on 

the remote control to display the “Motion Region” window again.

 - Select : Selected cell is set to be a part of motion detection area.

 - Unselect : Selected cell is removed from the motion detection area.

 - Inverse : Unselected cells are set to be the motion detection area.

 - Menu : After selecting individual motion areas, move to the “Motion Region” window.

 `

If selected <Apply to All CH>, selected motion area is applied to all channels.

 When the motion detection setup is done, press <OK>.

  Select
  Unselect
  Inverse
  Menu

 OK  Cancel

Apply to All CH

CH1

Individual

 OK 

Cancel

Previous/Next Page

 CH 

Mode 



 Sensitivity 



 Alarm 



 

Alarm Duration 

 1 

OFF   Level10(High) 



 

None 

 

10 sec 



 2 

OFF   Level10(High) 



 

None 

 

10 sec 



 3 

OFF   Level10(High) 



 

None 

 

10 sec 



 4 

OFF   Level10(High) 



 

None 

 

10 sec 



 5 

OFF   Level10(High) 



 

None 

 

10 sec 



 6 

OFF   Level10(High) 



 

None 

 

10 sec 



 7 

OFF   Level10(High) 



 

None 

 

10 sec 



 8 

OFF   Level10(High) 



 

None 

 

10 sec 



Motion Region