Samsung SDS-P5102/P5122 User Manual

60_

main menu

NETwORK CONFIGURATION

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with

events. You can configure the network environment which enables such functions.

Connection Mode

You can set the network connection route and protocol.

Setting the Connection

Sets the protocol and environment of the network.

Using the mouse may help make setup easier.

1. Press the [MENU] button on the remote control.
2. Use the left/right button (_ +) to select <Network>.

Network menu is selected.

3. Use the up/down buttons (▲▼) to move to <Connection

Mode>, and press [ENTER] button.

4. Select <Interface>.

A window of connection mode setup appears.

5. Use direction buttons (▲▼_ +) to move to a desired

item, and set the value.

•

IP Type : Sets the network connection mode.

•

Transfer Bandwidth : Sets the maximum data flow to be

transferred. (Upload speed)

Options will vary depending on the selected connection

mode.

- For <Static>, <DHCP> : Select one from 50 kbps ~

2Mbps, and Unlimited.

- For <PPPoE>, select one from 50 kbps ~ 600 kbps.

•

IP Address, Gateway, Subnet Mask, and DNS

- For <Static> : You can directly input IP Address, Gateway,

Subnet Mask and DNS.

- For <DHCP> : IP Address, Gateway, and Subnet Mask

are set automatically.

- For <PPPoE> : IP Address, Gateway, and Subnet Mask

are set automatically.

•

ID, Password : In case you selected PPPoE, provide the

“ID” and its “Password”.

DNS server for <DHCP> and <PPPoE> can be set by user

only if you selected <Manual>.

6. When the connection setup is done, press <OK>.

Connection Mode

Interface

Port



IP Type

Static



Transfer Bandwidth 2Mbps

Cancel



IP Address 192.168.1.200



Gateway

192.168.1.1



Subnet Mask

255.255.255.0



DNS

Manual

168.126.63.1

Network

Logout

Return

Connection Mode
DDNS
Live Transfer
Mailing Service