Clover Electronics CDR0860 User Manual

 
 

MODEL: CDR1660 / CDR0860 / CDR0460            H.264 STAND-ALONE DVR USER MANUAL V 2.6 

 

74

At the SYSTEM menu,   

Double-click FACTORY DEFAULT SETTING or 
highlight FACTORY DEFAULT SETTING and then 
press the ENTER button and the FACTORY DEFAULT 
window will be displayed like the left picture.   
 
Double-click YES to reset all menu settings back to 
factory default. Or double-click NO or click the X button 
to exit without resetting.   
In case of using the remote controller or the front panel 
buttons, move the cursor using the ▲,▼ buttons and 
press the ENTER button.   
Refer to Appendix 12.3. FACTORY DEFAULT 

VALUES on page 109. 

The DVR’s software can be upgraded for the latest feature updates, fixes and improvements via 
the USB flash memory.    The USB flash memory with the upgrade file must be inserted into the 
front USB port. 
   
At the SYSTEM menu,   

Double-click FIRMWARE UPDATE or highlight 
FIRMWARE UPDATE and then press the ENTER 
button and the FIRMWARE UPDATE window will be 
displayed like the left picture.   
 
Double-click YES to begin the firmware update. Or 
double-click NO or click the X button to exit without 
resetting.  
In case of using the remote controller or the front panel 
buttons, move the cursor using the ▲,▼ buttons and 
press the ENTER button.   

 

 
 

   

Upgrading percent message                    Reboot the system message