Clover Electronics CDR0860 User Manual

 
 

MODEL: CDR1660 / CDR0860 / CDR0460            H.264 STAND-ALONE DVR USER MANUAL V 2.6 

 

76

 
At the LINK menu, 

 
Double-click NETWORK or highlight NETWORK and 
then press the ENTER button and you can see the 
NETWORK menu like the left picture.   
 
Click the X button or press the ESC button to exit from 
this screen. 
 
 
 
 
 

 

At the NETWORK menu, 

Double-click DHCP or highlight DHCP and then press 
the ENTER button and you can see the DHCP menu 
like the left picture.   
 
Click the X button or press the ESC button to exit from 
this screen. 
 
Select the DHCP option ON or OFF by clicking the left 
button of the mouse. Or in case of using the remote 
controller or the front panel buttons, highlight DHCP 
and press the ENTER button and then move the 
cursor to the desired value using the ▲,▼ buttons 
and press

 

the ENTER button.    

The default is OFF. 
DHCP (Dynamic Host Configuration Protocol) automates the assignment of the IP address, 
Subnet Mask, Gateway and other IP parameters. The DHCP should be enabled (ON) in order to 
utilize DDNS (Refer to section 8.4.1.4. DDNS SERVER on page 77).     
 

 
8.4.1.2. STATIC IP 
 

At the NETWORK menu, 

 
Double-click STATIC IP or highlight STATIC IP and 
then press the ENTER button and you can see the 
STATIC IP menu like the left picture.   
 
Click the X button or press the ESC button to exit from 
this screen.