DirecTV ProScan DSS Receiver User Manual
The Menu System
52
The Dish Pointing Menu Screen
Follow these steps to obtain your dish pointing coordinates:
1. Turn on your television and satellite receiver.
2. Tune your television to the satellite receiver’s output channel.
3. Press MENU•SELECT on the remote or front panel to bring up the
Main menu.
4. Use the arrows to highlight the “Dish Pointing” option, and then
press MENU•SELECT to access the dish pointing screen.
NOTE: The menu screen that you see may be slightly different
from the one pictured here.
from the one pictured here.
5. Use the arrows on the remote or the front panel to highlight “Zip
Code” and then press MENU•SELECT.
6. Enter the zip code for the dish installation location.
7. Record the elevation and azimuth numbers below.
Elevation ____________
Azimuth ___________
Elevation is the up/
down angle that the
dish is pointed.
down angle that the
dish is pointed.
Azimuth is side to
side direction that
the dish is pointed.
side direction that
the dish is pointed.
You only need to use one of the
available methods to find your dish
pointing coordinates. If you know the
zip code for the locality where the dish
is being installed, use that.
available methods to find your dish
pointing coordinates. If you know the
zip code for the locality where the dish
is being installed, use that.