DirecTV ProScan DSS Receiver User Manual

The Menu System

LOW SPEED DATA

Back of DSS Receiver

Home Control

Home Control lets you remotely control several lamps and appliances
through your DSS

®

 receiver. To control these devices, you must first

connect a Home Control Data Interface to the receiver and a remote
module to the device you want to control.

Once you have connected your Home Control devices, you can
control them through the on-screen menus.

Connecting Home Control Modules

1. Remove the cover from the battery compartment.

2. Insert batteries as shown in the battery compartment, matching the

+ and - end of each battery.

3. Replace the cover.

1. Plug the Data Interface cable into the LOW SPEED DATA port on

the back of the DSS

®

 receiver and tighten the screws.

2. Snap the other end of the cable into the Data Interface module.

3. Plug the Data Interface module into a power outlet, making sure to

insert the plug completely.

4. Plug the DSS

®

 receiver power cord plug into the Data Interface

module’s convenience outlet. Be sure to insert the plug
completely.

1. Plug the lamp power cord plug into the Lamp module. Be sure to

insert the plug completely.

2. Plug the Lamp module into a power outlet, making sure to insert

the plug completely.