3com V7111 User Manual

 

The V7111 application software already resides in the device’s flash memory when it is 
supplied (with factory default parameters). V7111 devices also include an Embedded 
(integrally stored) Web Server. 

 describes how to assign an IP address to the V7111. 

 describes how to set up the V7111 with basic parameters using 

a standard Web browser (such as Microsoft

 TM

 Internet Explorer). 

 

 

To assign an IP address to the V7111 use one of the following methods: 

ƒ

  HTTP using a Web browser (see 

). 

ƒ

 BootP 

ƒ

  Voice Menu using a standard touch-tone telephone connected to one of the FXS analog 

ports (see 

). This method 

doesn’t apply to FXO gateways. 

ƒ

  The embedded Command Line Interface (CLI) accessed via Telnet or RS-232 (see 

). 

ƒ

  DHCP (refer to the product’s User’s Manual). 

The default networking parameters are show in

 Table 9

. 

Use the ‘Reset’ button at any time to restore the V7111 networking parameters to their 
factory default values (see 

). 

3Com VCX V7111 Analog Gateway Installation Guide 

 25